What will my floor cost?
Pick a size and a finish to see a price range built only from the sources listed below. Already have a quote? Check where it sits.
Sources checked November 12, 202625 cited sources in the calculator, 11 of them Florida-specific
Your range shows here
Built from 25 cited sources. Nothing you type is sent anywhere unless you tick the save box on Check my quote.
Want real quotes? Send one request to up to 3 verified crews.
How the range is worked out
- We collect published price ranges for each finish and record where each one came from and when we checked it.
- For a finish, we take the middle (median) of the low prices and the middle of the high prices per square foot, then multiply by your square feet.
- When at least two Florida-specific ranges exist for that finish, we use only those. Otherwise we use every matching range, and the result says how many of its sources are Florida-specific.
- DIY prices, labor-only prices, materials-only prices and equipment rental are kept out, because they are not what a crew charges for an installed floor.
- We round the low end down and the high end up to the nearest $50, and we also show the widest spread across all the sources.
- Add-ons such as moisture testing or repairs are listed below but kept out of the base range.
- We do not adjust by ZIP yet. The ranges are Florida-wide until we have enough confirmed local job prices.
- Quotes you choose to save are stored without your name or contact details, and are checked before they count toward published numbers.
Count: 25 cited sources are used in the calculator right now.
Sources
| Item | Range | Unit | Florida-specific | Source | Checked | Note |
|---|---|---|---|---|---|---|
| epoxy, professional install, per sq ft | $3 to $12 | sqft | No | This Old House | November 12, 2026 | "contractors charge $3-$12 per square foot" (materials and labor); page header gives range as $3-$12 |
| epoxy, DIY, per sq ft Not an installed price, not in the range | $2 to $5 | sqft | No | This Old House | November 12, 2026 | DIY epoxy flooring "$2-$5 per square foot" |
| metallic epoxy, per sq ft | $5 to $12 | sqft | No | This Old House | November 12, 2026 | Listed as an additive: "Metallic epoxy floor $5-$12 per square foot" |
| 2-car garage (360 sq ft avg), DIY epoxy Not an installed price, not in the range | $720 to $1,800 | job | No | This Old House | November 12, 2026 | "A typical two car garage, which runs 360 square feet on average, costs $720-$1,800 for DIY epoxy application" |
| site preparation (purchased separately) Add-on, not in the base range | $50 to $100 | job | No | This Old House | November 12, 2026 | "site preparation typically costs $50-$100" |
| epoxy, professional install, per sq ft | $2 to $12 | sqft | No | Angi | November 12, 2026 | "Professional epoxy flooring installation costs $2 to $12 per square foot ... including materials and labor" |
| 2-car garage (500 sq ft), epoxy | $1,500 to $6,000 | job | No | Angi | November 12, 2026 | Table: two-car garage 500 sq ft $1,500-$6,000; 1-car 250 sq ft $750-$3,000; 3-car 750 sq ft $2,250-$9,000 |
| epoxy labor only, per sq ft Not an installed price, not in the range | $1 to $7 | sqft | No | Angi | November 12, 2026 | "Expect to pay $1 to $7 per square foot or $50 to $150 per hour" for labor, 33%-60% of total |
| concrete crack patching before coating Add-on, not in the base range | $25 to $250 | job | No | Angi | November 12, 2026 | "basic concrete patching running $25 to $250"; structural repair quoted separately on the page |
| epoxy garage floor, total job Not used in the calculator (unit) | $1,650 to $3,494 | job | No | HomeAdvisor | November 12, 2026 | "Normal Range: $1,650 - $3,494"; average $2,526 (page titled 2026 cost) |
| epoxy, per sq ft incl. installation | $3 to $12 | sqft | No | Bob Vila (epoxy garage floor cost) | November 12, 2026 | "Epoxy flooring averages between $3 and $12 per square foot, including installation fees" |
| epoxy labor only, per sq ft Not an installed price, not in the range | $4 to $7 | sqft | No | Bob Vila (epoxy garage floor cost) | November 12, 2026 | "Labor costs average between $4 and $7 per square foot" |
| one-car garage (240 sq ft), epoxy Not used in the calculator (unit) | $720 to $2,900 | job | No | Bob Vila (epoxy garage floor cost) | November 12, 2026 | "A 240-square-foot one-car garage can cost between $720 and $2,900 to epoxy" |
| polyaspartic, per sq ft | $4 to $9 | sqft | No | Bob Vila (polyaspartic floor coating cost) | November 12, 2026 | "Homeowners can expect polyaspartic floor coating to cost between $4 to $9 per square foot" |
| moisture barrier add-on, per sq ft Add-on, not in the base range | $1 to $1 | sqft | No | Bob Vila (polyaspartic floor coating cost) | November 12, 2026 | "If a moisture barrier is required, it could cost an extra $1 per square foot" (single published figure) |
| 2-car garage (500 sq ft), polyaspartic | $2,000 to $4,500 | job | No | Bob Vila (polyaspartic floor coating cost) | November 12, 2026 | Table row: 500 square feet $2,000 to $4,500 |
| garage floor coating (any type), per sq ft | $4 to $12 | sqft | No | HomeGuide (garage floor coating cost) | November 12, 2026 | "Garage floor coating costs $4 to $12 per square foot for the materials and installation"; materials $1-$6, labor $3-$6 |
| epoxy, per sq ft | $4 to $10 | sqft | No | HomeGuide (garage floor coating cost) | November 12, 2026 | Type table: Epoxy $4-$10 per square foot |
| polyaspartic, per sq ft | $5 to $12 | sqft | No | HomeGuide (garage floor coating cost) | November 12, 2026 | "Polyaspartic garage floor coating costs $5 to $12 per square foot or $2,000 to $6,900 total ... 2-car garage" |
| 2-car garage (400 sq ft), garage floor coating | $1,600 to $4,800 | job | No | HomeGuide (garage floor coating cost) | November 12, 2026 | Size table: 2-car (20x20) 400 sq ft $1,600-$4,800 |
| polyurea, per sq ft | $5 to $10 | sqft | No | HomeGuide (polyurea garage floor coating cost) | November 12, 2026 | "Polyurea garage floor coating costs $5 to $10 per square foot" |
| concrete testing before coating Add-on, not in the base range | $50 to $300 | job | No | HomeGuide (polyurea garage floor coating cost) | November 12, 2026 | "Testing may add $50 to $300, or more if the concrete requires hardening treatments or a moisture ..." (page text continues; moisture testing named as a related add-on) |
| epoxy, per sq ft | $3 to $12 | sqft | No | Inch Calculator | November 12, 2026 | "Typical Price Range (per square foot) $3 - $12"; national average price $2,000 |
| epoxy garage floor, total job Not used in the calculator (unit) | $1,703 to $3,280 | job | No | Thumbtack | November 12, 2026 | "national average cost of epoxy garage floor coatings ranges from $1,703-$3,280"; low-end $1,046, high-end $5,261 |
| epoxy, per sq ft (400-450 sq ft, fair shape to damaged concrete) | $3 to $3.25 | sqft | No | Thumbtack | November 12, 2026 | Example table: fair shape $3.00 per sq ft, damaged concrete $3.25 per sq ft (two published figures, shown as low and high) |
| epoxy, per sq ft | $3 to $12 | sqft | No | Taskrabbit | November 12, 2026 | "average cost for an epoxy garage floor ranges between $3 to $12 per square foot" |
| concrete repair/resurfacing before epoxy, per sq ft Add-on, not in the base range | $1 to $3 | sqft | No | Taskrabbit | November 12, 2026 | "Concrete repair or resurfacing may be necessary ... can cost anywhere from $1 to $3 per square foot" |
| epoxy, professional install, per sq ft | $4 to $10 | sqft | No | ThePricer | November 12, 2026 | "approximately $4 to $10 per square foot professionally installed in the United States in 2026" |
| polyaspartic, professional install, per sq ft | $5 to $12 | sqft | No | ThePricer | November 12, 2026 | "Professional polyaspartic systems generally cost $5-$12 per square foot" |
| epoxy coat garage floor, per sq ft (national average) | $7.78 to $12.71 | sqft | No | Homewyse | November 12, 2026 | "estimated national average cost to Epoxy Coat Garage Floor starts at $7.78 - $12.71 per square foot" (May 2026) |
| epoxy, solid/partial flake, installed, per sq ft | $4 to $12 | sqft | No | One Stop Epoxy | November 12, 2026 | "solid color and partial flake epoxy floors may run about $4.00 to $12.00 per square foot" (professional installation planning range; seller of kits) |
| epoxy flake, full flake, installed, per sq ft | $5.50 to $9.50 | sqft | No | One Stop Epoxy | November 12, 2026 | "Full flake epoxy floors may run about $5.50 to $9.50 per square foot" |
| metallic epoxy, installed, per sq ft | $10 to $16 | sqft | No | One Stop Epoxy | November 12, 2026 | "Metallic epoxy floors may run about $10.00 to $16.00 per square foot, with high end custom metallic installers sometimes charging $22.00 to $26.00" |
| epoxy, professional install, per sq ft | $5 to $9 | sqft | No | ArmorGarage | November 12, 2026 | "Professional installation for the same garage typically runs $1,200-$3,240 ($5-$9 per sq ft)"; DIY kits $1.08 to $2.66 per sq ft (kit seller) |
| floor grinder rental (prep), per day Add-on, not in the base range | $100 to $200 | job | No | ArmorGarage | November 12, 2026 | "Floor grinder rental (if needed): $100-$200 per day"; DIY prep cost, not a contractor price |
| polyaspartic, per sq ft | $4 to $9 | sqft | No | Garage Force | November 12, 2026 | "Polyaspartic floor coating typically costs $4-$9 per square foot"; franchise coating brand |
| epoxy, per sq ft | $3 to $12 | sqft | No | Garage Force | November 12, 2026 | "The cost per square foot ranges between $3 and $12, with an average of $7.15" (epoxy) |
| epoxy floor, Tampa, per sq ft incl. materials | $5 to $7 | sqft | Yes | HomeBlue (Tampa) | November 12, 2026 | "Epoxy floor cost in Tampa, Florida ranges from $5 to $7 per square foot (including materials)"; page dated April 29, 2025; no per-finish breakdown |
| 2-car garage (500 sq ft), epoxy, Tampa | $2,300 to $3,600 | job | Yes | HomeBlue (Tampa) | November 12, 2026 | "Epoxy garage floor cost (2-car garage, 500-sf): $2,300 to $3,600" |
| 1-car garage (250 sq ft), epoxy, Tampa | $1,100 to $1,800 | job | Yes | HomeBlue (Tampa) | November 12, 2026 | "Epoxy garage floor cost (1-car garage, 250-sf): $1,100 to $1,800" |
| epoxy floor, Sarasota, per sq ft incl. materials | $5 to $8 | sqft | Yes | HomeBlue (Sarasota) | November 12, 2026 | "Epoxy floor cost in Sarasota, Florida ranges from $5 to $8 per square foot (including materials)"; page dated April 29, 2025 |
| 2-car garage (500 sq ft), epoxy, Sarasota | $2,400 to $3,800 | job | Yes | HomeBlue (Sarasota) | November 12, 2026 | "Epoxy garage floor cost (2-car garage, 500-sf): $2,400 to $3,800" |
| polyaspartic flake garage system incl. grinding, per sq ft | $7 to $9 | sqft | Yes | Tampa Bay Floor Coating Pros (Clearwater) | November 12, 2026 | "$7-9 per square foot"; FAQ says it covers grinding, crack repair, base coat, flake and top coat. Business publishes no owner name; verify before relying on it |
| 2-car garage (500-600 sq ft), flake system | $4,000 to $5,000 | job | Yes | Tampa Bay Floor Coating Pros (Clearwater) | November 12, 2026 | "$4,000-5,000" typical two-car garage |
| epoxy garage floor coatings, equipment and materials, per sq ft Not an installed price, not in the range | $2 to $5 | sqft | Yes | Five Star Painting of New Port Richey | November 12, 2026 | "epoxy garage floor coatings, equipment, and materials are about $2 to $5 per square foot"; franchise outlet, New Port Richey; no finish named |
| 2-car garage, full broadcast flake + polyaspartic topcoat, Tampa, per sq ft | $5 to $7 | sqft | Yes | CountBricks (Tampa) | November 12, 2026 | "averages $5-$7 per square foot" |
| full-system epoxy install, Ruskin / Tampa Bay, per sq ft | $5 to $9.50 | sqft | Yes | Epoxy 4 Life / One Of A Kind Epoxy (Ruskin) | November 12, 2026 | "typically lands between $5 and $9.50 per square foot for a professionally installed, full-system floor" |
| metallic epoxy, Ruskin / Tampa Bay, per sq ft | $8 to $12 | sqft | Yes | Epoxy 4 Life / One Of A Kind Epoxy (Ruskin) | November 12, 2026 | "metallic designer floors running about $8-$12 per square foot" |
| garage epoxy coating, per sq ft | $9 to $16 | sqft | Yes | Top Gun Garage | November 12, 2026 | FAQ: garage epoxy coating "around $9 to $16 per square foot"; Fort Myers crew serving Lee and Collier |
| solid color epoxy, starting per sq ft | $5 to $5 | sqft | Yes | Epoxy Creations | November 12, 2026 | "Starting at" price; 2-car solid estimate $2,000-$2,750 for 400-500 sq ft |
| decorative flake epoxy, starting per sq ft | $7 to $7 | sqft | Yes | Epoxy Creations | November 12, 2026 | Starting price |
| metallic epoxy, starting per sq ft | $9 to $9 | sqft | Yes | Epoxy Creations | November 12, 2026 | Starting price |
| 2-car garage (~400 sq ft), solid color epoxy | $2,000 to $2,750 | job | Yes | Epoxy Creations | November 12, 2026 | Estimate for 400-500 sq ft as stated on page |
| epoxy install (3+ coats), starting per sq ft | $4.85 to $4.85 | sqft | Yes | Cook Homes Inc. | November 12, 2026 | "starting at around $4.85 per square foot"; typical 2-car about 400 sq ft |
| epoxy floor, Orlando, per sq ft incl. materials | $5 to $8 | sqft | Yes | HomeBlue (Orlando) | November 12, 2026 | "$5 to $8 per square foot (including materials)"; page dated April 29, 2025 |
| 1-car garage (250 sq ft), epoxy, Orlando | $1,200 to $1,900 | job | Yes | HomeBlue (Orlando) | November 12, 2026 | page dated April 29, 2025 |
| 2-car garage (500 sq ft), epoxy, Orlando | $2,400 to $3,800 | job | Yes | HomeBlue (Orlando) | November 12, 2026 | page dated April 29, 2025 |
| 3-car garage (750 sq ft), epoxy, Orlando | $3,600 to $5,700 | job | Yes | HomeBlue (Orlando) | November 12, 2026 | page dated April 29, 2025 |
| solid color epoxy, per sq ft, starting price, Orlando area | $4 to $4 | sqft | Yes | A1 Epoxy Coatings | November 12, 2026 | "solid color starts at $4/sqft"; starting price, not a range |
| full flake epoxy, per sq ft, starting price, Orlando area | $5 to $5 | sqft | Yes | A1 Epoxy Coatings | November 12, 2026 | "full flake at $5/sqft"; starting price |
| metallic/custom epoxy, per sq ft, starting price, Orlando area | $14 to $14 | sqft | Yes | A1 Epoxy Coatings | November 12, 2026 | "metallic/custom at $14/sqft"; starting price |
| garage epoxy flake, per sq ft, starting price, Clermont/Central FL | $5.99 to $5.99 | sqft | Yes | Big Top Concrete Resurfacing | November 12, 2026 | published starting point; final quote after free site visit |
| metallic epoxy, per sq ft, starting price, Clermont/Central FL | $8 to $8 | sqft | Yes | Big Top Concrete Resurfacing | November 12, 2026 | published starting point |
| polished concrete, per sq ft, starting price, Clermont/Central FL | $4.50 to $4.50 | sqft | Yes | Big Top Concrete Resurfacing | November 12, 2026 | published starting point |
| grind and seal, per sq ft, starting price, Clermont/Central FL Add-on, not in the base range | $3 to $3 | sqft | Yes | Big Top Concrete Resurfacing | November 12, 2026 | published starting point |
| moisture barrier add-on, per sq ft, Clermont/Central FL Add-on, not in the base range | $1.50 to $1.50 | sqft | Yes | Big Top Concrete Resurfacing | November 12, 2026 | "+$1.50" add-on |
| premium topcoat add-on, per sq ft, Clermont/Central FL Add-on, not in the base range | $1.25 to $1.25 | sqft | Yes | Big Top Concrete Resurfacing | November 12, 2026 | "+$1.25" add-on |
| crack repair, flat, Clermont/Central FL Add-on, not in the base range | $450 to $450 | job | Yes | Big Top Concrete Resurfacing | November 12, 2026 | "$450 flat"; job minimum exists but amount not stated |